Skip to content

GATE EC Op-amp Circuits questions

Practise Op-amp Circuits questions for GATE EC. Explore official PYQs and original topic-wise quizzes, check answers and view available solutions. Free, no sign-in.

Subject, topic, year and type filter the full library. Match any choice within a filter, and all selected filter categories. Search, source and sort apply to this page.

20 on this page
Official PYQ2015Analog CircuitsOp-amp CircuitsNAT · 1 mark
In the circuit shown using an ideal opamp, the 33-dB cut-off frequency (in Hz) is _______.
Official PYQ2015Analog CircuitsOp-amp CircuitsMCQ · 1 mark
Consider a four-point moving average filter defined by the equation y[n]=∑i=03αi x[n−i].y[n] = \displaystyle{}\sum _{i=0}^{3}\alpha_{i}\:x[n-i]. The condition on the filter coefficients that results in a null at zero frequency is
Official PYQ2015Analog CircuitsOp-amp CircuitsNAT · 2 marks
In the circuit shown, assume that the opamp is ideal. If the gain (v0/vin)(v_{0} / v_{in}) is –12,–12, the value of R (in kΩ)R\: (\text{in}\: k\Omega) is _____.
Official PYQ2014Analog CircuitsOp-amp CircuitsNAT · 1 mark
In the low-pass filter shown in the figure, for a cut-off frequency of 5 kHz,5\:kHz, the value of R2 (in kΩ)R_{2}\:(\text{in}\:k\Omega) is ______.
Official PYQ2014Analog CircuitsOp-amp CircuitsNAT · 2 marks
In the voltage regulator circuit shown in the figure, the op-amp is ideal. The BJT has VBE=0.7 VV_{BE} = 0.7\:V and β=100,\beta = 100, and the zener voltage is 4.7 V.4.7\:V. For a regulated output of 9 V,9\:V, the value of RR (in Ω)\Omega) is ______.
Official PYQ2014Analog CircuitsOp-amp CircuitsMCQ · 2 marks
In the circuit shown the op-amp has finite input impedance, infinite voltage gain, and zero input offset voltage. The output voltage VoutV_{out} is
Official PYQ2014Analog CircuitsOp-amp CircuitsNAT · 1 mark
An analog voltage in the range 00 to 88 V is divided in 1616 equal intervals for conversion to 44-bit digital output. The maximum quantization error (in V) is __________
Official PYQ2014Analog CircuitsOp-amp CircuitsMCQ · 2 marks
Assuming that the Op-amp in the circuit shown is ideal, VoV_{o} is given by
Official PYQ2014Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The circuit shown in the figure represents a
Official PYQ2014Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The circuit shown represents
Official PYQ2013Analog CircuitsOp-amp CircuitsMCQ · 2 marks
In the circuit shown below the op-amps\text{op-amps} are ideal. Then VoutV_{\text{out}} in Volts\text{Volts} is
Official PYQ2012Analog CircuitsOp-amp CircuitsMCQ · 2 marks
The input x(t)x(t) and output y(t)y(t) of a system are related as y(t)=∫−∞x(τ)cos⁡(3τ)dτy(t)=\underset{-\infty}{\int}x(\tau)\cos(3\tau)d\tau. The system is
Official PYQ2012Analog CircuitsOp-amp CircuitsMCQ · 2 marks
The feedback system shown below oscillates at 2 rad/s2\:rad/s when
Official PYQ2012Analog CircuitsOp-amp CircuitsMCQ · 2 marks
Assuming both the voltage sources are in phase, the value of RR for which maximum power is transferred from circuit AA to circuit BB is
Official PYQ2006Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The input impedance (Zi)\left(\text{Z}_i\right) and the output impedance (Zo)\left(\text{Z}_o\right) of an ideal transconductance (voltage controlled current source) amplifier are
Official PYQ2006Analog CircuitsOp-amp CircuitsMCQ · 1 mark
For the circuit shown in the following figure, the capacitor CC is initially uncharged. At t=0t=0, the switch SS is closed. The voltage VCV_{C} across the capacitor at t=1t=1 millisecond is In the figure shown above, the OP AMP\text{OP AMP} is supplied with ±15 V\pm 15 \mathrm{~V} and the ground has been shown by the symbol ∇\nabla.
Official PYQ2006Analog CircuitsOp-amp CircuitsMCQ · 1 mark
statement for Linked Answer Questions 76 and 77 A regulated power supply, shown in figure below, has an unregulated input (UR) of 1515 Volts and generates a regulated output Vout V_{\text{out }}. Use the component values shown in the figure. In the figure above, the ground has been shown by the symbol ∇\nabla The power dissipation across the transistor …
Official PYQ2006Analog CircuitsOp-amp CircuitsMCQ · 1 mark
statement for Linked Answer Questions 76 and 77 A regulated power supply, shown in figure below, has an unregulated input (UR) of 1515 Volts and generates a regulated output Vout V_{\text{out }}. Use the component values shown in the figure. In the figure above, the ground has been shown by the symbol ∇\nabla If the unregulated voltage increases by …
Official PYQ2005Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The effect of current shunt feedback in an amplifier is to
Official PYQ2005Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The input resistance Ri\text{R}_{\mathrm{i}} of the amplifier shown in the figure is