Skip to content

GATE EC Op-amp Circuits questions

Practise Op-amp Circuits questions for GATE EC. Explore official PYQs and original topic-wise quizzes, check answers and view available solutions. Free, no sign-in.

Subject, topic, year and type filter the full library. Match any choice within a filter, and all selected filter categories. Search, source and sort apply to this page.

20 on this page
Official PYQ2005Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The voltage e0e_{0} indicated in the figure has been measured by an ideal voltmeter. Which of the following can be calculated?
Official PYQ2005Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The OP-amp\text{OP-amp} circuit shown in the figure is a filter. The type of filter and its cut-off frequency are respectively
Official PYQ2004Analog CircuitsOp-amp CircuitsMCQ · 1 mark
An ideal op-amp\text{op-amp} is an ideal
Official PYQ2004Analog CircuitsOp-amp CircuitsMCQ · 1 mark
Voltage series feedback (also called series-shunt feedback) results in
Official PYQ2004Analog CircuitsOp-amp CircuitsMCQ · 1 mark
In the op-amp\text{op-amp} circuit given in the figure, the load current iLi_{\text{L}} is
Official PYQ2003Analog CircuitsOp-amp CircuitsMCQ · 1 mark
If the input to the ideal comparator shown in the figure is a sinusoidal signal of 8 V8 \mathrm{~V} (peak to peak) without any DC component, then the output of the comparator has a duty cycle of
Official PYQ2003Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The oscillator circuit shown in the figure is has an ideal inverting amplifier. Its frequency of oscillation (in Hz\mathrm{Hz} ) is
Official PYQ2003Analog CircuitsOp-amp CircuitsMCQ · 1 mark
If the op-amp\text{op-amp} in the figure is idea, the output voltage Voult will be equal to
Official PYQ2003Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The circuit shown in the figure is a 44 bit DAC\text{DAC} The input bits 00 and 11 are represented by 00 and 5 V5 \mathrm{~V} respectively. The OP AMP\text{OP AMP} is ideal, but all the resistances and the 5 V5 \mathrm{~V} inputs have a tolerance of ±10%\pm 10 \%. The specification (rounded to the nearest multiple of 5%5 \% ) for the tolerance …
Official PYQ2002Analog CircuitsOp-amp CircuitsMCQ · 1 mark
A 741741-type opamp has a gain-bandwidth product of 1  MHz1 \; \mathrm{MHz}. A non-inverting amplifier using this opamp and having a voltage gain of 20 dB20 \mathrm{~dB} will exhibit a −3−dB-3-\mathrm{dB} bandwidth of
Official PYQ2002Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The circuit in figure employs positive feedback and is intended to generate sinusoidal oscillation. If at a frequency f0, B(f)=ΔVf(f)V0(f)=16∠0∘f_{0}, \mathrm{~B}(f)=\Delta \frac{V_{f}(f)}{V_{0}(f)}=\frac{1}{6} \angle 0^{\circ}, then to sustain oscillation at this frequency
Official PYQ2002Analog CircuitsOp-amp CircuitsMCQ · 1 mark
An amplifier using an opamp with a slew-rate SR=1S R=1 V/μsecV / \mu \mathrm{sec} has a gain of 40 dB40 \mathrm{~dB}. If this amplifier has to faithfully amplify sinusoidal signals from dc to 20  kHz20 \; \mathrm{kHz} without introducing any slew-rate induced distortion, then the input signal level must not exceed.
Official PYQ2001Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The ideal OP-AMP\text{OP-AMP} has the following characteristics.
Official PYQ2001Analog CircuitsOp-amp CircuitsMCQ · 1 mark
In the figure, assume the OP-AMPs to be ideal. The output v0v_{0} of the circuit is
Official PYQ2001Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The inverting OP-AMP shown in the figure has an open-loop gain of 100.100. The closed-loop gain v0vs\frac{v_{0}}{v_{s}} is
Official PYQ2000Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The circuit of the figure represents a
Official PYQ2000Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The most commonly used amplifier in sample and hold circuits is
Official PYQ2000Analog CircuitsOp-amp CircuitsMCQ · 1 mark
Assume that the on-amp\text{on-amp} of the figure is ideal. If vi\text{vi} is a triangular wave, then vo\text{vo} will be
Official PYQ2000Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The configuration of given figure is a
Official PYQ2000Analog CircuitsOp-amp CircuitsMCQ · 1 mark
If the op-amp\text{op-amp} in figure is ideal, then v0v_{0} is