Skip to content

GATE EC Transmission Lines questions

Practise Transmission Lines questions for GATE EC. Explore official PYQs and original topic-wise quizzes, check answers and view available solutions. Free, no sign-in.

Subject, topic, year and type filter the full library. Match any choice within a filter, and all selected filter categories. Search, source and sort apply to this page.

20 on this page
Official PYQ2026ElectromagneticsTransmission LinesMCQ · 1 mark
Consider the Friis' transmission equation PR=(PTGTGRλ2)/(4πD)2P_{R}=\left(P_{T} G_{T} G_{R} \lambda^{2}\right) /(4 \pi D)^{2}, where PRP_{R} and PTP_{T} are the received and the transmitted powers, respectively. GTG_{T} and GRG_{R} are the gain of transmitting and receiving antennas, respectively, DD is the distance between the transmitting and receiving …
Official PYQ2026ElectromagneticsTransmission LinesNAT · 1 mark
The cutoff frequency ( in GHz\text{in GHz} ) for the dominant TE10\mathrm{TE}_{10} mode of an air-filled rectangular waveguide of inner dimension 0.280.28 inch ×0.14\times 0.14 inch is ____\_\_\_\_ . (rounded off to two decimal places).
Official PYQ2026ElectromagneticsTransmission LinesMCQ · 2 marks
A complex load (in Ω\Omega ) is represented as ΓL=0.5∠30∘\Gamma_{L}=0.5 \angle 30^{\circ} on the Smith chart. A co-axial cable with a characteristic impedance of 50 Ω50 ~\Omega is connected to the load. The new input impedance of the load now moves to a diametrically opposite point on the same Γ\Gamma circle on the Smith chart. Which option is the nearest …
Official PYQ2025ElectromagneticsTransmission LinesNAT · 2 marks
A 50Ω50 \Omega lossless transmission line is terminated with a load ZL\mathrm{Z}_{\mathrm{L}} of (50−j75)Ω(50-\mathrm{j} 75) \Omega. If the average incident power on the line is 10 mW10 \: \mathrm{mW}, then the average power delivered to the load (in mW\mathrm{mW}, rounded off to one decimal place) is _______\_\_\_\_\_\_\_.
Official PYQ2024ElectromagneticsTransmission LinesMCQ · 1 mark
​​​​Consider a lossless transmission line terminated with a short circuit as shown in the figure below. As one moves towards the generator from the load, the normalized impedances zinA ,zinB,zinCz_{\text{inA }}, z_{i n B}, z_{i n C}, and zinDz_{i n D} (indicated in the figure) are ______.\_\_\_\_\_\_.
Official PYQ2024ElectromagneticsTransmission LinesNAT · 2 marks
A lossless transmission line with characteristic impedance Z0=50Ω\mathrm{Z}_{0}=50 \Omega is terminated with an unknown load. The magnitude of the reflection co-efficient is ∣Γ∣=0.6|\Gamma|=0.6. As one moves towards the generator from the load, the maximum value of the input impedance magnitude looking towards the load (in Ω\Omega ) is ______.\_\_\_\_\_\_.
Official PYQ2023ElectromagneticsTransmission LinesMCQ · 2 marks
The SS-parameters of a two-port network is given as [S]=[S11S12S21S22][S]=\left[\begin{array}{ll} S_{11} & S_{12} \\ S_{21} & S_{22} \end{array}\right] with reference to Z0Z_0. Two lossless transmission line sections of electrical lengths θ1=βl1\theta_1=\beta l_1 and θ2=βl2\theta_2=\beta l_2 are added to the input and output ports for measurement purposes, …
Official PYQ2023ElectromagneticsTransmission LinesMSQ · 2 marks
The standing wave ratio on a 50  Ω50 \; \Omega lossless transmission line terminated in an unknown load impedance is found to be 2.02.0. The distance between successive voltage minima is 30 cm30 \mathrm{~cm} and the first minimum is located at 10 cm10 \mathrm{~cm} from the load. ZLZ_L can be replaced by an equivalent length lml_m and terminating resistance …
Official PYQ2023ElectromagneticsTransmission LinesMSQ · 2 marks
The following circuit(s) representing a lumped element equivalent of an infinitesimal section of a transmission line is/are
Official PYQ2022ElectromagneticsTransmission LinesMSQ · 2 marks
A waveguide consists of two infinite parallel plates (perfect conductors) at a separation of 10−4  cm,10^{-4} \; \text{cm}, with air as the dielectric. Assume the speed of light in air to be 3×108  m/s.3 \times 10^{8} \; \text{m/s}. The frequency/frequencies of TM\text{TM} waves which can propagate in this waveguide is/are _________.
Official PYQ2021ElectromagneticsTransmission LinesNAT · 1 mark
The refractive indices of the core and cladding of an optical fiber are 1.501.50 and 1.481.48, respectively. The critical propagation angle, which is defined as the maximum angle that the light beam makes with the axis of the optical fiber to achieve the total internal reflection, (rounded off to two decimal places) is _____ degree.
Official PYQ2021ElectromagneticsTransmission LinesMCQ · 2 marks
The impedance matching network shown n the figure is to match a lossless line having characteristic impedance Z0=50 ΩZ_{0}= 50 \:\Omega with a load impedance ZLZ_{L}. A quarter-wave line having a characteristic impedance Z1=75 ΩZ_1=75\:\Omega is connected to ZLZ_{L}. Two stubs having characteristic impedance of 75 Ω75\:\Omega each are connected to this …
Official PYQ2021ElectromagneticsTransmission LinesNAT · 2 marks
A standard air-filled rectangular waveguide with dimensions a=8 cm, b=4 cm\text{a=8 cm, b=4 cm}, operates at 3.4 GHz\text{3.4 GHz}. For the dominant mode of wave propagation, the phase velocity of the signal in vpv_{p}. The value (rounded off to two decimal places) of vp/cv_{p}/c, where cc denotes the velocity of light, is ________________________
Official PYQ2021ElectromagneticsTransmission LinesNAT · 2 marks
An antenna with a directive gain of 6 dB6\text{ dB} is radiating a total power of 16 kW\text{16 kW}. The amplitude of the electric field in free space at a distance of 8 km\text{8 km} from the antenna in the direction of 6 dB\text{6 dB} gain (rounded off to three decimal places) is ____________________ V/m\text{V/m}.
Official PYQ2020ElectromagneticsTransmission LinesMCQ · 1 mark
The impedances Z=jX,Z=jX, for all XX in the range (−∞,∞)\left ( -\infty ,\infty \right ), map to the Smith chart as
Official PYQ2020ElectromagneticsTransmission LinesNAT · 1 mark
A transmission line of length 3λ/43\lambda /4 and having a characteristic impedance of 5050 Ω\Omega is terminated with a load of 400Ω400 \Omega. The impedance (rounded off to two decimal places) seen at the input end of the transmission line is __________ Ω\Omega.
Official PYQ2020ElectromagneticsTransmission LinesMCQ · 2 marks
For an infinitesimally small dipole in free space, the electric field EθE_{\theta } in the far field is proportional to e−jkr/rsin⁡θe^{-jkr/r}\sin\theta, where k=2π/λk=2\pi /\lambda. A vertical infinitesimally small electric dipole (δl≪λ)\left (\delta l \ll \lambda \right ) is placed at a distance h(h>0)h\left ( h> 0 \right ) above an infinite ideal conducting plane, …
Official PYQ2020ElectromagneticsTransmission LinesNAT · 2 marks
For a 22-port network consisting of an ideal lossless transformer, the parameter S21S_{21} (rounded off to two decimal places) for a reference impedance of 10Ω10 \Omega, is __________.
Official PYQ2019ElectromagneticsTransmission LinesNAT · 1 mark
Radiation resistance of a small dipole current element of length ll at a frequency of 33 GHz is 33 ohms. If the length is changed by 1%1\%, then the percentage change in the radiation resistance, rounded off to two decimal places, is ________ %.\%.
Official PYQ2019ElectromagneticsTransmission LinesMCQ · 2 marks
The dispersion equation of a waveguide, which relates the wavenumber kk to the frequency ω\omega is k(ω)=(1/c)ω2−ω∘2k(\omega)= (1/c) \sqrt{\omega^{2}-\omega_{\circ}^{2}} where the speed of light c=2×108 m/sc= 2 \times 10^{8}\: m/s and ω∘\omega_{\circ} is a constant . If the group velocity is 2×108 m/s2 \times 10^{8}\: m/s, then the phase velocity is