Skip to content

GATE EC BJT and MOSFET Amplifiers questions

Practise BJT and MOSFET Amplifiers questions for GATE EC. Explore official PYQs and original topic-wise quizzes, check answers and view available solutions. Free, no sign-in.

Subject, topic, year and type filter the full library. Match any choice within a filter, and all selected filter categories. Search, source and sort apply to this page.

20 on this page
Official PYQ2016Analog CircuitsBJT and MOSFET AmplifiersMCQ · 1 mark
In the circuit shown below, VsV_{s} is a constant voltage source and ILI_{L} is a constant current load. The value of ILI_{L} that maximizes the power absorbed by the constant current load is
Official PYQ2016Analog CircuitsBJT and MOSFET AmplifiersMCQ · 1 mark
The Ebers-Moll model of a BJTBJT is valid
Official PYQ2016Analog CircuitsBJT and MOSFET AmplifiersMCQ · 1 mark
A long-channel NMOSNMOS transistor is biased in the linear region with VDS=50V_{DS}=50 mm VV and is used as a resistance. Which one of the following statement is NOTNOT correct?
Official PYQ2016Analog CircuitsBJT and MOSFET AmplifiersMCQ · 1 mark
Which one of the following statements is correct about an ac-coupled common-emitter amplifier operating in the mid-band region?
Official PYQ2016Analog CircuitsBJT and MOSFET AmplifiersNAT · 2 marks
Consider a long-channel NMOSNMOS transistor with source and body connected together. Assume that the electron mobility is independent of VGSV_{GS} and VDS.V_{DS}. Given, gm=0.5μA/V for VDS=50 mV and  VGS=2 Vg_{m}=0.5\mu A/V \text{ for } V_{DS}=50\:mV \text{ and } \: V_{GS}= 2 \: V, gd=8μA/V for VGS=2 V and VDS=0 Vg_{d}=8\mu A/V \text{ for } V_{GS}=2\:V \text{ and }V_{DS}=0 \:V, where …
Official PYQ2016Analog CircuitsBJT and MOSFET AmplifiersNAT · 1 mark
Consider the circuit shown in the figure. Assuming VEE1=VEE2=0.7V_{EE1} = V_{EE2} = 0.7 volt, the value of the dc voltage VC2V_{C2}(in volt) is _______
Official PYQ2016Analog CircuitsBJT and MOSFET AmplifiersNAT · 2 marks
The injected excess electron concentration profile in the base region of an npnnpn BJT, biased in the active region, is linear, as shown in the figure. If the area of the emitter-base junction is 0.001 cm2,μn=800cm2/(V−s)0.001\:cm^2 ,\mu_n=800cm^2/(V-s) in the base region and depletion layer widths are negligible, then the collector current IcI_c(in mA) at room temperature is …
Official PYQ2016Analog CircuitsBJT and MOSFET AmplifiersMCQ · 2 marks
In the circuit shown in the figure , the channel length modulation of all transistors is non-zero (λ≠0)(\lambda\neq0). Also, all transistors operate in saturation and have negligible body effect .The ac small signal voltage gain (Vo/VinV_o/V_{in}) of the circuit is _________
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersNAT · 2 marks
A MOSFET in saturation has a drain current of 11 mA for VDS=0.5 VV_{DS} =0.5 \: V. If the channel length modulation coefficient is 0.05 V−10.05 \: V^{-1}, the output resistance (in kΩk \Omega) of the MOSFET is ___________.
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersMCQ · 2 marks
For the NMOSFET in the circuit shown, the threshold voltage is VthV_{th}, where Vth>0V_{th}>0. The source voltage VSSV_{SS} is varied from 00 to VDDV_{DD}. Neglecting the channel length modulation, the drain current IDI_D as a function of VSSV_{SS} is represented by
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersNAT · 2 marks
In the circuit shown, I1=80I_1=80 mA and I2=4I_2=4 mA. Transistors T1T_1 and T2T_2 are identical. Assume that the thermal voltage VTV_T is 2626 mV at 27∘C27^{\circ}C. At 50∘C50^{\circ}C, the value of the voltage V12=V1−V2V_{12}=V_1 - V_2 (in mV) is _______.
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersMCQ · 1 mark
The 22-port admittance matrix of the circuit shown is given by
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersMCQ · 2 marks
An LCLC tank circuit consists of an ideal capacitor CC connected in parallel with a coil of inductance LL having an internal resistance R.R. The resonant frequency of the tank circuit is
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersNAT · 2 marks
In the ac equivalent circuit shown, the two BJTs are biased in active region and have identical parameters with β≫1\beta \gg 1. The open circuit small signal voltage gain is approximately _______.
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersNAT · 1 mark
In the circuit shown, the voltage VXV_{X} (in Volts) is ________.
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersNAT · 1 mark
At very high frequencies, the peak output voltage V0V_{0} (in Volts) is _______.
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersMCQ · 1 mark
Which one of the following processes is preferred to form the gate dielectric (SiO2)(SiO_{2}) of MOSFETs ?
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersMCQ · 1 mark
If the base width in a bipolar junction transistor is doubled, which one of the following statements will be TRUE?
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersNAT · 1 mark
In the circuit shown in the figure, the BJT has a current gain (β)(\beta) of 50.50. For an emitter-base voltage ܸ VEB=600 mV,V_{EB} = 600\: mV, the emitter-collector voltage VECV_{EC} (in Volts) is _______.
Official PYQ2015Analog CircuitsBJT and MOSFET AmplifiersNAT · 2 marks
The current in an enhancement mode NMOS transistor biased in saturation mode was measured to be 1 mA1\: mA at a drain-source voltage of 5 V.5\: V. When the drain-source voltage was increased to 6 V6\: V while keeping gate-source voltage same, the drain current increased to 1.02 mA.1.02\: mA. Assume that drain to source saturation voltage is much smaller than …