Skip to content

GATE EC Electromagnetics questions

Practise Electromagnetics questions for GATE EC. Explore official PYQs and original subject-wise quizzes, check answers and view available solutions. Free, no sign-in.

Subject, topic, year and type filter the full library. Match any choice within a filter, and all selected filter categories. Search, source and sort apply to this page.

20 on this page
Official PYQ2026ElectromagneticsTransmission LinesMCQ · 1 mark
Consider the Friis' transmission equation PR=(PTGTGRλ2)/(4πD)2P_{R}=\left(P_{T} G_{T} G_{R} \lambda^{2}\right) /(4 \pi D)^{2}, where PRP_{R} and PTP_{T} are the received and the transmitted powers, respectively. GTG_{T} and GRG_{R} are the gain of transmitting and receiving antennas, respectively, DD is the distance between the transmitting and receiving …
Official PYQ2026ElectromagneticsPlane Waves and PropertiesMCQ · 1 mark
The electric field of a monochromatic plane wave travelling in a lossless isotropic and homogenous medium is given by E⃗(z,t)=E0[x^cos⁡(ωt−kz)+y^sin⁡(ωt−kz)]\vec{E}(z, t)=E_{0}[\hat{x} \cos (\omega t-k z)+\hat{y} \sin (\omega t-k z)] in a right-handed orthogonal co-ordinate system. Which of the following is the correct polarization of the electromagnetic wave?
Official PYQ2026ElectromagneticsTransmission LinesNAT · 1 mark
The cutoff frequency ( in GHz\text{in GHz} ) for the dominant TE10\mathrm{TE}_{10} mode of an air-filled rectangular waveguide of inner dimension 0.280.28 inch ×0.14\times 0.14 inch is ____\_\_\_\_ . (rounded off to two decimal places).
Official PYQ2026ElectromagneticsTransmission LinesMCQ · 2 marks
A complex load (in Ω\Omega ) is represented as ΓL=0.5∠30∘\Gamma_{L}=0.5 \angle 30^{\circ} on the Smith chart. A co-axial cable with a characteristic impedance of 50 Ω50 ~\Omega is connected to the load. The new input impedance of the load now moves to a diametrically opposite point on the same Γ\Gamma circle on the Smith chart. Which option is the nearest …
Official PYQ2025ElectromagneticsMaxwell's EquationsMCQ · 2 marks
A square metal sheet of 4 m×4 m4 \mathrm{~m} \times 4 \mathrm{~m} is placed on the x−yx-y plane as shown in the figure below. If the surface charge density (in μC/m2\mu \mathrm{C} / \mathrm{m}^{2} ) on the sheet is ρs(x,y)=4∣y∣\rho_{s}(x, y)=4\mid y \mid, then the total charge (in μC\mu \mathrm{C}, rounded off to the nearest integer) on the sheet is ______\_\_\_\_\_\_
Official PYQ2025ElectromagneticsMaxwell's EquationsMCQ · 2 marks
An electric field of 0.01 V/m0.01 \mathrm{~V} / \mathrm{m} is applied along the length of a copper wire of circular cross-section with diameter 1 mm1 \: \mathrm{mm}. Copper has a conductivity of 5.8×107 S/m5.8 \times 10^{7} \mathrm{~S} / \mathrm{m}. The current (in Amperes, rounded off to two decimal places) flowing through the wire is ______\_\_\_\_\_\_.
Official PYQ2025ElectromagneticsTransmission LinesNAT · 2 marks
A 50Ω50 \Omega lossless transmission line is terminated with a load ZL\mathrm{Z}_{\mathrm{L}} of (50−j75)Ω(50-\mathrm{j} 75) \Omega. If the average incident power on the line is 10 mW10 \: \mathrm{mW}, then the average power delivered to the load (in mW\mathrm{mW}, rounded off to one decimal place) is _______\_\_\_\_\_\_\_.
Official PYQ2024ElectromagneticsTransmission LinesMCQ · 1 mark
​​​​Consider a lossless transmission line terminated with a short circuit as shown in the figure below. As one moves towards the generator from the load, the normalized impedances zinA ,zinB,zinCz_{\text{inA }}, z_{i n B}, z_{i n C}, and zinDz_{i n D} (indicated in the figure) are ______.\_\_\_\_\_\_.
Official PYQ2024ElectromagneticsPlane Waves and PropertiesMCQ · 2 marks
A uniform plane wave with electric field E⃗(x)=Aya^ye−j2πx3 V/m\vec{E}(x)=A_{y} \hat{a}_{y} e^{-j \frac{2 \pi x}{3}} \mathrm{~V} / \mathrm{m} is travelling in the air (relative permittivity, ϵr=1\epsilon_{r}=1 and relative permeability, μr=1\mu_{r}=1 ) in the +x+x direction ( AyA_{y} is a positive constant, a^y\hat{a}_{y} is the unit vector along the yy axis). It is …
Official PYQ2024ElectromagneticsTransmission LinesNAT · 2 marks
A lossless transmission line with characteristic impedance Z0=50Ω\mathrm{Z}_{0}=50 \Omega is terminated with an unknown load. The magnitude of the reflection co-efficient is ∣Γ∣=0.6|\Gamma|=0.6. As one moves towards the generator from the load, the maximum value of the input impedance magnitude looking towards the load (in Ω\Omega ) is ______.\_\_\_\_\_\_.
Official PYQ2023ElectromagneticsPlane Waves and PropertiesMCQ · 1 mark
Consider a narrow band signal, propagating in a lossless dielectric medium (εr=4,μr=1)\left(\varepsilon_{r}=4, \mu_{r}=1\right), with phase velocity vpv_{p} and group velocity vgv_{g}. Which of the following statement is true? (cc is the velocity of light in vacuum.)
Official PYQ2023ElectromagneticsTransmission LinesMCQ · 2 marks
The SS-parameters of a two-port network is given as [S]=[S11S12S21S22][S]=\left[\begin{array}{ll} S_{11} & S_{12} \\ S_{21} & S_{22} \end{array}\right] with reference to Z0Z_0. Two lossless transmission line sections of electrical lengths θ1=βl1\theta_1=\beta l_1 and θ2=βl2\theta_2=\beta l_2 are added to the input and output ports for measurement purposes, …
Official PYQ2023ElectromagneticsTransmission LinesMSQ · 2 marks
The standing wave ratio on a 50  Ω50 \; \Omega lossless transmission line terminated in an unknown load impedance is found to be 2.02.0. The distance between successive voltage minima is 30 cm30 \mathrm{~cm} and the first minimum is located at 10 cm10 \mathrm{~cm} from the load. ZLZ_L can be replaced by an equivalent length lml_m and terminating resistance …
Official PYQ2023ElectromagneticsPlane Waves and PropertiesMSQ · 2 marks
The electric field of a plane electromagnetic wave is E=axC1xcos⁡(ωt−βz)+ayC1ycos⁡(ωt−βz+θ)V/m\boldsymbol{E}=\boldsymbol{a}_{x} C_{1 x} \cos (\omega t-\beta z)+\boldsymbol{a}_{y} C_{1 y} \cos (\omega t-\beta z+\theta) \quad \mathrm{V} / \mathrm{m}. Which of the following combination(s) will give rise to a left handed elliptically polarized (LHEP)\text{(LHEP)} wave?
Official PYQ2023ElectromagneticsTransmission LinesMSQ · 2 marks
The following circuit(s) representing a lumped element equivalent of an infinitesimal section of a transmission line is/are
Official PYQ2023ElectromagneticsPlane Waves and PropertiesNAT · 2 marks
A transparent dielectric coating is applied to glass (εr=4,μr=1)\left(\varepsilon_r=4, \mu_r=1\right) to eliminate the reflection of red light (λ0=0.75  μm)\left(\lambda_0=0.75 \; \mu \mathrm{m}\right). The minimum thickness of the dielectric coating, in μm\mu \mathrm{m}, that can be used is_____________(rounded off to two decimal places).
Official PYQ2022ElectromagneticsTransmission LinesMSQ · 2 marks
A waveguide consists of two infinite parallel plates (perfect conductors) at a separation of 10−4  cm,10^{-4} \; \text{cm}, with air as the dielectric. Assume the speed of light in air to be 3×108  m/s.3 \times 10^{8} \; \text{m/s}. The frequency/frequencies of TM\text{TM} waves which can propagate in this waveguide is/are _________.
Official PYQ2021ElectromagneticsPlane Waves and PropertiesMCQ · 1 mark
Consider a rectangular coordinate system (x,y,z)(x,y,z) with unit vectors ax aya_{x}\:a_{y} and aza_{z}. A plane wave traveling in the region z≥0z\geq 0 with electric field vector E=10cos⁡(2×108t + βz)ayE=10\cos\left ( 2\times 10^{8}t\:+\:\beta z\right )a_{y} is incident normally on the plane at z=0z=0, where β\beta is the phase constant. The region z≥0z\geq 0 is in free …
Official PYQ2021ElectromagneticsTransmission LinesNAT · 1 mark
The refractive indices of the core and cladding of an optical fiber are 1.501.50 and 1.481.48, respectively. The critical propagation angle, which is defined as the maximum angle that the light beam makes with the axis of the optical fiber to achieve the total internal reflection, (rounded off to two decimal places) is _____ degree.
Official PYQ2021ElectromagneticsTransmission LinesMCQ · 2 marks
The impedance matching network shown n the figure is to match a lossless line having characteristic impedance Z0=50 ΩZ_{0}= 50 \:\Omega with a load impedance ZLZ_{L}. A quarter-wave line having a characteristic impedance Z1=75 ΩZ_1=75\:\Omega is connected to ZLZ_{L}. Two stubs having characteristic impedance of 75 Ω75\:\Omega each are connected to this …