Skip to content

GATE EC question library

Practise GATE EC Electronics and Communication previous year questions free. Browse by subject, syllabus topic, year and question type, with answers and available solutions.

Subject, topic, year and type filter the full library. Match any choice within a filter, and all selected filter categories. Search, source and sort apply to this page.

20 on this page
Official PYQ2015Analog CircuitsDiode CircuitsMCQ · 1 mark
For the circuit with ideal diodes shown in the figure, the shape of the output voutv_{\text{out}} for the given sine wave input vinv_{\text{in}} will be
Official PYQ2015Electronic DevicesNAT · 1 mark
In the circuit shown below, the Zener diode is ideal and the Zener voltage is 66 V. The output voltage VoV_o (in volts) is ________.
Official PYQ2015Electronic DevicesMCQ · 1 mark
In the circuit shown, the switch SW is thrown from position AA to position BB at time t=0t=0. The energy (in μJ\mu J) taken from the 33 V source to charge the 0.1 μF0.1 \: \mu F capacitor from 00 V t 33 V is
Official PYQ2015Digital CircuitsComputer OrganizationMCQ · 1 mark
In an 8085 microprocessor, the shift registers which store the result of an addition and the overflow bit are, respectively
Official PYQ2015Digital CircuitsCombinatorial CircuitsNAT · 1 mark
A 1616 Kb (=16,384=16,384 bits) memory array is designed as a square with an aspect ratio of one (number of rows is equal to the number of columns). The minimum number of address lines needed for the row decoder is ___________
Official PYQ2015Digital CircuitsData ConvertersNAT · 1 mark
Consider a four bit DD to AA converter. The analog value corresponding to digital signals of values 00000000 and 00010001 are 00 V and 0.06250.0625 V respectively. The analog value (in Volts) corresponding to the digital signal 11111111 is _________
Official PYQ2015Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
The result of the convolution x(−t)∗δ(−t−t0)x(-t) * \delta (-t-t_0) is
Official PYQ2015Networks, Signals and SystemsContinuous-time SignalsNAT · 1 mark
The waveform of a periodic signal x(t)x(t) is shown in the figure. A signal g(t)g(t) is defined by g(t)=x(t−12)g(t) = x \big( \frac{t-1}{2} \big). The average power of g(t)g(t) is ________
Official PYQ2015Control SystemsMCQ · 1 mark
Negative feedback in a closed-loop control system  DOES NOT\textbf{ DOES NOT}
Official PYQ2015Control SystemsNAT · 1 mark
A unity negative feedback system has the open-loop transfer function G(s)=Ks(s+1)(s+3)G(s) = \frac{K}{s(s+1)(s+3)}. The value of the gain K(>0)K (>0) at which the root locus crosses the imaginary axis is ________
Official PYQ2015ElectromagneticsPlane Waves and PropertiesMCQ · 1 mark
The polar plot of the transfer function G(s)=10(s+1)s+10G(s) = \frac{10(s+1)}{s+10} for 0≤ω<∞0 \leq \omega < \infty will be in the
Official PYQ2015Networks, Signals and SystemsContinuous-time SignalsMCQ · 1 mark
A sinusoidal signal of 22 kHz frequency is applied to a delta modulator. The sampling rate and step-size Δ\Delta of the data modulator are 20,00020,000 samples per second and 0.10.1 V, respectively. To prevent slope overload, the maximum amplitude of the sinusoidal signal (in Volts) is
Official PYQ2015Networks, Signals and SystemsContinuous-time SignalsMCQ · 1 mark
Consider the signal s(t)=m(t)cos⁡(2π fct)+m^(t)sin⁡(2πfct)s(t)=m(t) \cos(2 \pi \: f_ct)+ \hat{m}(t) \sin(2 \pi f_c t) where m^(t)\hat{m}(t) denotes the Hilbert transform of m(t)m(t) and the bandwidth of m(t)m(t) is very small compared to fcf_c. The signal s(t)s(t) is a
Official PYQ2015Electronic DevicesMCQ · 1 mark
Consider a straight, infinitely long, current carrying conductor lying on the z-axis. Which one of the following plots (in linear scale) qualitatively represents the dependence of HϕH_{\phi} on rr, where HϕH_{\phi} is the magnitude of the azimuthal component of magnetic field outside the conductor and rr is the radial distance from the conductor?
Official PYQ2015ElectromagneticsPlane Waves and PropertiesNAT · 1 mark
The electric field component of a plane wave traveling in a lossless dielectric medium is given by E→(z,t)=a^y2cos⁡(10st−z2) V/m\overrightarrow{E}(z,t) = \hat{a}_y 2 \cos \bigg( 10^st-\frac{z}{\sqrt{2}} \bigg) \: V/m. The wavelength (in m) for the wave is ___________.
Official PYQ2015Engineering MathematicsDifferential EquationsMCQ · 2 marks
The solution of the differential equation d2ydt2+2dydt+y=0\frac{d^2y}{dt^2} + 2 \frac{dy}{dt}+y=0 with y(0)=y’(0)=1y(0)=y’(0)=1 is
Official PYQ2015Engineering MathematicsVector AnalysisMCQ · 2 marks
A vector P→\overrightarrow{P} is given by P→=x3ya→x–x2y2a→y–x2yza→z\overrightarrow{P} = x^3y\overrightarrow{a}_x – x^2y^2\overrightarrow{a}_y – x^2 yz \overrightarrow{a}_z. Which one of the statements is TRUE?
Official PYQ2015Engineering MathematicsCalculusMCQ · 2 marks
Which one of the following graphs describes the function f(x)=e−x(x2+x+1)f(x)=e^{-x}(x^2+x+1)?
Official PYQ2015Engineering MathematicsCalculusNAT · 2 marks
The maximum area (in square units) of a rectangle whose vertices lie on the eclipse x2+4y2=1x^2+4y^2=1 is __________.
Official PYQ2015Networks, Signals and SystemsCircuit AnalysisMCQ · 2 marks
The damping ratio of a series RLC circuit can be expressed as