Skip to content

GATE EC question library

Practise GATE EC Electronics and Communication previous year questions free. Browse by subject, syllabus topic, year and question type, with answers and available solutions.

Subject, topic, year and type filter the full library. Match any choice within a filter, and all selected filter categories. Search, source and sort apply to this page.

20 on this page
Official PYQ2001Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
The admittance parameter Y12\mathrm{Y}_{12} in the 22-port network in the figure,
Official PYQ2001Control SystemsMCQ · 1 mark
The transfer function of a system is given by H(s)=1s2(s−2)H(s)=\frac{1}{s^{2}(s-2)}. The impulse response of the system is
Official PYQ2001Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
If each branch of a Delta circuit has impedance 3Z\sqrt{3} Z, then each branch of the equivalent Wye circuit has impedance.
Official PYQ2001Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
This question consists of TWENTY FIVE sub-questions (1.1−1.25)(1.1 - 1.25) of ONE mark each. For each of these sub-questions, four possible answers ( A, B, C\text{A, B, C} and D\text{D} ) are given, out of which only one is correct. Answer each sub-question by darkening the appropriate bubble on the OBJECTIVE RESPONSE SHEET (ORS) using a soft HB pencil. Do not use …
Official PYQ2001ElectromagneticsTransmission LinesMCQ · 1 mark
In a uniform linear array, four isotropic radiating elements are spaced λ4\frac{\lambda}{4} apart. The progressive phase shift between the elements required for forming the main beam at 60∘60^{\circ} off the end-fire is
Official PYQ2001ElectromagneticsTransmission LinesMCQ · 1 mark
A medium wave radio transmitter operating at a wavelength of 492 m492 \mathrm{~m} has a tower antenna of height 124 m124 \mathrm{~m}. What is the radiation resistance of the antenna?
Official PYQ2001ElectromagneticsPlane Waves and PropertiesMCQ · 1 mark
A uniform plane electromagnetic wave incident normally on a plane surface of a dielectric material is reflected with a VSWR of 3.3. What is the percentage of incident power that is reflected?
Official PYQ2001ElectromagneticsMaxwell's EquationsMCQ · 1 mark
A material has conductivity of 10−2mho/m10^{-2} \mathrm{mho/m} and a relative permittivity of 4.4. The frequency at which the conduction current in the medium is equal to the displacement current is
Official PYQ2001CommunicationsRandom ProcessesMCQ · 1 mark
The PSD and the power of a signal g(t)g(t) are, respectively, Sg(ω)\mathrm{S}_{\text{g}}(\omega) and Pg\text{P}_{\text{g}}. The PSD and the power of the signal ag(t)a \text{g}(t) are, respectively,
Official PYQ2001Engineering MathematicsProbability and StatisticsMCQ · 1 mark
During transmission over a communication channel, bit errors occur independently with probability p. If a block of nn bits is transmitted, the probability of at most one bit error is equal to
Official PYQ2001Networks, Signals and SystemsContinuous-time SignalsMCQ · 1 mark
The Nyquist sampling interval, for the signal Sin c (700t)+Sin c (500t)\text{Sin c } (700 t)+\text{Sin c } (500 t) is
Official PYQ2001CommunicationsInformation TheoryMCQ · 1 mark
A video transmission system transmits 625625 picture frames per second. Each frame consists of a 400×400400 \times 400 pixel grid with 6464 intensity levels per pixel. The data rate of the system is
Official PYQ2001Control SystemsMCQ · 1 mark
The feeback control system in the figure is stable.
Official PYQ2001Control SystemsMCQ · 1 mark
The open-loop DC\text{DC} gain of a unity negative feedback system with closed-loop transfer function s+4s2+7s+13\frac{s+4}{s^{2}+7 s+13} is
Official PYQ2001Control SystemsMCQ · 1 mark
An electrical system and its signal-flow graph representations are shown in the figure respectively. The values of G2G_{2} and HH, respectively, are
Official PYQ2001Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
The impulse response functions of four linear systems S1, S2, S3, S4\mathrm{S}_{1}, \mathrm{~S}_{2}, \mathrm{~S}_{3}, \mathrm{~S}_{4} are given respectively by h1(t)=1h2(t)=U(t)h3(t)=U(t)t+1h4(t)=e3tU(t)\begin{array}{ll} h_{1}(t)=1 & h_{2}(t)=U(t) \\ h_{3}(t)=\frac{U(t)}{t+1} & h_{4}(t)=e^{3 t} U(t) \end{array} Where U(t)\mathrm{U}(t) is the unit step function. Which of these systems is time …
Official PYQ2001Digital CircuitsCombinatorial CircuitsMCQ · 1 mark
In the TTL circuit in the figure, S2\mathrm{S}_{2} to S0\mathrm{S}_{0} are select lines and X7\text{X}_{7} to X0\text{X}_{0} are input lines. S0\text{S}_{0} and X0\text{X}_{0} are LSBs. The output YY is
Official PYQ2001Electronic DevicesMCQ · 1 mark
In the figure, the LED\text{LED}
Official PYQ2001Analog CircuitsOp-amp CircuitsMCQ · 1 mark
In the figure, assume the OP-AMPs to be ideal. The output v0v_{0} of the circuit is
Official PYQ2001Analog CircuitsOp-amp CircuitsMCQ · 1 mark
The inverting OP-AMP shown in the figure has an open-loop gain of 100.100. The closed-loop gain v0vs\frac{v_{0}}{v_{s}} is