Skip to content

GATE EC LTI Systems questions

Practise LTI Systems questions for GATE EC. Explore official PYQs and original topic-wise quizzes, check answers and view available solutions. Free, no sign-in.

Subject, topic, year and type filter the full library. Match any choice within a filter, and all selected filter categories. Search, source and sort apply to this page.

20 on this page
Official PYQ2006Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
A low-pass filter having a frequency response H(jω)=A(ω)  ejϕ(ω)\mathrm{H}(\mathrm{j} \omega)=\mathrm{A}(\omega) \;e^{j{\phi(\omega)}} does not produce any phase distortion, if
Official PYQ2006Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
A system with input x[n]x[n] and output y[n]y[n] is given as y[n]=(sin⁡56πn)x(n)y[n]=\left(\sin \frac{5}{6} \pi n\right) x(n). The system is
Official PYQ2006Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
Common Data for Questions 74, 75: Let g(t)=p(t)∗p(t)g(t)=p(t)^{*} p(t), where * denotes convolution and p(t)=u(t)−u(t−1)p(t)=u(t)-u(t-1) with u(t)u(t) being the unit step function The impulse response of filter matched to the signal s(t)=g(t)−δ(t−2)∗g(t)s(t)=g(t)-\delta(t-2)^{*} g(t) is given as
Official PYQ2005Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
A signal x(n)=sin⁡(ω0n+ϕ)x(n)=\sin \left(\omega_{0} n+\phi\right) is the input to a linear time-invariant system having a frequency response H(ejω)\text{H}(e^{j \omega}). If the output of the system Ax(n−n0)A x\left(n-n_{0}\right), then the most general form of ∠H(ejω)\angle \mathrm{H}\left(\mathrm{e}^{j \omega}\right) will be
Official PYQ2005Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
A signal as shown in the figure is applied to a matched filter. Which of the following does represent the output of this matched filter?
Official PYQ2004Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
The circuit in the given figure is a
Official PYQ2004Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
The impulse response h[n]h[n] of a linear time-invariant system is given by h[n]=u[n+3]+u[n−2]−2u[n−7]h[n]=u[n+3]+u[n-2]-2 u[n-7] where u[n]u[n] is the unit step sequence. The above system is
Official PYQ2004Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
A rectangular pulse train s(t)s(t) as shown in the figure is convolved with the signal cos⁡2(4p×103t)\cos ^{2}\left(4 p \times 10^{3} t\right). The convolved signal will be a
Official PYQ2004Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
A causal LTI\text{LTI} system is described by the difference equation 2y[n]=αy[n−2]−2x[n]+βx[n−1]2 y[n]=\alpha y[n-2]-2 x[n]+\beta x[n-1] The system is stable only if
Official PYQ2004Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
The impulse response h∣n∣h|n| of a linear time invariant system is given as h[n]={−22n=1,−142n=2,−20, otherwise h[n]=\left\{\begin{array}{cc} -2 \sqrt{2} & n=1,-1 \\ 4 \sqrt{2} & n=2,-2 \\ 0, & \text{ otherwise } \end{array}\right. If the input to the above system is the sequence ejπn/4\mathrm{e}^{j \pi n / 4}, then the output is
Official PYQ2004Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
Consider the signal x(t)x(t) shown in the figure. Let h(t)h(t) denote the impulse response of the filter matched to x(t)x(t), with h(t)h(t) being non-zero only in the interval 0 to 4  sec4 \; \mathrm{sec}. The slope of h(t)h(t) in the interval 3<t<sec.3 < t < \text{sec}. is
Official PYQ2003Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
Let x(t)x(t) be the input to a linear, time-invariant system. The required output is 4x(t−2)4 x(t-2). The transfer function of the system should be
Official PYQ2003Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
Let P\mathrm{P} be linearity, Q\mathrm{Q} be time-invariance, R\mathrm{R} be causality and S\mathrm{S} be stability. A discrete-time system has the input-output relationship, y(n)={x(n)n≥10,n=0x(n+1),n≤−1y(n)=\left\{\begin{array}{ll} x(n) & n \geq 1 \\ 0, & n=0 \\ x(n+1), & n \leq-1 \end{array}\right. where x(n)x(n) is the input and y(n)y(n) is the output. …
Official PYQ2003Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
Data for Q. 63-64 are given below. Solve the problems and choose the correct answers. The system under consideration is an RC low-pass filter (RC-LPF) with R=1.0k  ΩkR=1.0 \mathrm{k} \; \Omega \mathrm{k} and C=1.0  μF\mathrm{C}=1.0 \; \mu \mathrm{F} Let H(f)\mathrm{H}(f) denote the frequency response of the RC-LPF. Let f1f_{1} be the highest frequency such that …
Official PYQ2003Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
Data for Q. 63-64 are given below. Solve the problems and choose the correct answers. The system under consideration is an RCR C low-pass filter (RC-LPF) with R=1.0  kΩkR=1.0 \; \mathrm{k} \Omega \mathrm{k} and C=1.0  μF\mathrm{C}=1.0 \; \mu \mathrm{F} Let tg(f)t_{g}(f) be the group delay function of the given RC-LPF and f2=100 Hzf_{2}=100 \mathrm{~Hz}. Then …
Official PYQ2002Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
A linear phase channel with phase delay TpT_p and group delay TgT_g must have (ff denotes frequency)
Official PYQ2002Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
Convolution of x(t+5)x(t+5) with impulse function δ(t−7)\delta(t-7) is equal to
Official PYQ2002Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
If the variance σx2\sigma_{x}^{2} of d(n)=x(n)−x(n−1)d(n)=x(n)-x(n-1) is one-tenth the variance σx2\sigma_{x}^{2} of a stationary zero-mean discrete-time signal x(n)x(n), then the normalized autocorrelation function Rxx(k)/σx2R_{x x}(k) / \sigma_{x}^{2} at k=1k=1 is
Official PYQ2001Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
The impulse response functions of four linear systems S1, S2, S3, S4\mathrm{S}_{1}, \mathrm{~S}_{2}, \mathrm{~S}_{3}, \mathrm{~S}_{4} are given respectively by h1(t)=1h2(t)=U(t)h3(t)=U(t)t+1h4(t)=e3tU(t)\begin{array}{ll} h_{1}(t)=1 & h_{2}(t)=U(t) \\ h_{3}(t)=\frac{U(t)}{t+1} & h_{4}(t)=e^{3 t} U(t) \end{array} Where U(t)\mathrm{U}(t) is the unit step function. Which of these systems is time …
Official PYQ2000Networks, Signals and SystemsLTI SystemsMCQ · 1 mark
A linear time invariant system has an impulse response e2t,t>0e^{2 t}, t>0. If the initial conditions are zero and the input is e3te^{3 t}, then output for t>0t>0 is