Skip to content

GATE EC Circuit Analysis questions

Practise Circuit Analysis questions for GATE EC. Explore official PYQs and original topic-wise quizzes, check answers and view available solutions. Free, no sign-in.

Subject, topic, year and type filter the full library. Match any choice within a filter, and all selected filter categories. Search, source and sort apply to this page.

20 on this page
Official PYQ2001Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
This question consists of TWENTY FIVE subquestions (2.1−2.25)(2.1-2.25) of TWO marks each. For each of these sub-questions, four possible answers ( A, B, C\text{A, B, C} and D\text{D}) are given, out of which only one is correct. Answer each sub-question by darkening the appropriate bubble on the OBJECTIVE RESPONSE SHEET (ORS) using a soft HB pencil. Do not use …
Official PYQ2000Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
In the given circuit, the value of the voltage source E\mathrm{E} is
Official PYQ2000Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
In the given circuit, the voltage v(t)\text{v(t)} is
Official PYQ2000Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
Use the data of the figure. The current ii in the circuit of the figure is
Official PYQ1999Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
A 22-port network is shown in the given figure. The parameter h21h_{21} for this network can be given by
Official PYQ1999Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
If [f(t)]=F(s)[f(t)]=\mathrm{F}(s), then [f(t−T)][f(t-\mathrm{T})] is equal to
Official PYQ1999Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
A dc\text{dc} power supply has a no-load voltage if 30 V30 \mathrm{~V}, and a full-load voltage of 25 V25 \mathrm{~V} at a full - load current of 1 A1 \mathrm{~A}. Its output resistance and load regulation, respectively, are
Official PYQ1999Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
A Delta-connected network with its Wye-equivalent is shown in the given figure is. The resistances R1,R2R_{1}, R_{2} and R3R_{3} (in ohms) are respectively
Official PYQ1999Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
The Thevenin equivalent voltage VTH\mathrm{V}_{\mathrm{TH}} appearing between the terminals AA and BB of the network shown in the given figure is given by
Official PYQ1998Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
The voltage across the terminals aa and bb in the figure is
Official PYQ1998Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
The short-circuit admittance matrix o a two-port network is [0−1/21/20]\left[\begin{array}{cc} 0 & -1 / 2 \\ 1 / 2 & 0 \end{array}\right] The two-port network is
Official PYQ1998Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
Superposition theorem is NOT\text{NOT} applicable to networks containing
Official PYQ1998Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
The nodal method of circuit analysis is based on
Official PYQ1998Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
A network has 77 nodes and 55 independent loops. The number of branches in the network is
Official PYQ1998Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
The parallel RLC circuit shown in the figure is in resonance. In this circuit
Official PYQ1998Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
The current II through resistance r\mathrm{r} in the circuit shown in the figure is
Official PYQ1997Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
The voltage VV in the figure is
Official PYQ1997Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
The current i4i_4 in the circuit of the figure is equal to
Official PYQ1997Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
In the circuit of the figure is the equivalent impedance seen across terminals a, b\text{a, b} is
Official PYQ1997Networks, Signals and SystemsCircuit AnalysisMCQ · 1 mark
In the circuit of the figure is the energy absorbed by the 4  Ω4 \; \Omega resistor in the time interval (0,∞)(0, \infty) is